How to make an electric emergency heater for your car in minutes?

Have you ever found yourself stranded in the middle of nowhere with a dead car battery and no functioning heater? It’s not only frustrating, but it can also be dangerous in cold weather. Luckily, with a little bit of ingenuity and some basic tools, you can create an electric emergency heater for your car to keep you warm and safe in unexpected situations.

In this article, we’ll walk you through the steps to make your own electric emergency car heater that can come in handy when you need it the most. Get ready to learn some simple but effective hacks that will keep you warm and cozy in your car during an emergency. Are you ready to get started? Let’s dive in!

How to make an electric emergency heater for your car

How to make an electric emergency heater for your car?

Materials needed

First, let’s go through the materials you’ll need to get started:

  • Ceramic heater element
  • Temperature control module
  • Electric wires
  • Fuse holder and fuses
  • Heat resistant tape
  • Soldering iron and solder
  • Drill and drill bits
  • Wire cutters and strippers
  • Heat shrink tubing
  • Insulated pliers
  • Screwdriver
  • Safety glasses

Choosing Materials

When selecting your materials, consider efficiency, cost, and durability. Look for a ceramic heater element with a power output of at least 150 watts, which will provide sufficient heat output for your car. The temperature control module should have high accuracy to ensure that the heater works at the desired temperature. It’s also essential to choose electric wires with a sufficient gauge for the power output of the heater element to avoid overheating.

Step 1: Preparing the Heater Element

Begin by preparing the ceramic heater element by attaching the temperature control module to the ceramic heater element with heat-resistant tape. Make sure to cover the heater element in tape until the wires are connected.

Step 2: Wiring the Heater Element

Next, cut two lengths of electric wire – one red and one black – and strip the ends. Solder the red wire to the positive terminal of the heater element and the black wire to the negative terminal. Use heat shrink tubing to insulate the soldered connections.

Step 3: Installing the Fuse Holder

Employ a drilling device to create an aperture on the inferior surface of the plastic receptacle, thereby enabling the wires to traverse through it. Mount the fuse holder to the plastic container with screws and attach the wires from the heater element to the fuse holder. Insert the appropriate fuse into the holder.

Step 4: Connecting to Power

Strip the ends of the remaining wires and connect them to the temperature control module. Finally, connect the wires to your car battery, observing the correct polarity.

Step 5: Testing and Troubleshooting

Turn on your car and switch on the heater. Ensure that the temperature control module is functioning correctly and that the heater produces enough heat. If the heater is not working as expected, check the wiring and ensure that all connections are properly insulated.

That’s it – you’ve successfully created an electric emergency heater for your car! Now you’ll have a reliable heat source in an emergency or if your car’s heating system fails. It is crucial to adhere to all required safety protocols when tinkering with electrical apparatuses, and one must be scrupulous in donning protective eyewear to shield oneself from mishaps.

You may also like: How does an electric car heater work: Stay warm and efficient

Testing the Heater: A Crucial Step for Optimal Performance

After creating your electric emergency heater, testing is crucial to ensure it’s functioning correctly. Start by checking all electrical connections to ensure they are properly connected and in working order. If any connections are loose or damaged, it can prevent the heater from working correctly or potentially cause damage to your car’s electrical system.

With the electrical connections verified to be secure, it is time to stimulate the heart of the engine. Please turn it on and wait for a couple of minutes to allow it to build up heat. Then, please turn on the heater and adjust it to your desired temperature. Wait for a few minutes, and you should feel warm air from the heater. If you don’t feel any warmth, double-check the connections and test the heater again.

Maintaining the Heater: Tips for Longevity and Optimal Performance

Maintaining your electric emergency heater is essential to ensure it has a long lifespan and optimally performs when needed. Here are a few simple and effective tips to keep your heater in top condition:

  1. Keep it clean: As the chronology advances, minute particles of dust and fragments can gather on the heater, inducing a decline in its operational efficiency. It is highly advisable to regularly and meticulously cleanse the device by wiping it down with a moistened fabric to ensure sustained performance.
  2. Store it properly: When not in use, store the heater in a cool, dry place to prevent any moisture from building up and causing damage.
  3. Check the connections: Periodically check the electrical connections to ensure they remain secure and free of damage. Loose or damaged connections can cause the heater to malfunction or damage your car’s electrical system.
  4. Test it regularly: It’s essential to test the heater regularly, especially before the cold season starts. This will give you the peace of mind that it’s working correctly and will be ready to use when needed.

Following these tips ensures that your electric emergency heater is in top condition and ready to use when you need it most.

Is there a portable heater for a car?

Absolutely! There are various types of portable heaters available for cars. Some of the most popular options include electric, propane, and ceramic heaters. These compact and lightweight heaters make them easy to carry around and store in your car when not in use.

Plus, they are generally designed to be energy-efficient, so you can stay warm without draining your car battery or running up your gas bill. Just be sure to choose a heater that’s appropriate for your car’s size and power source, and follow all safety precautions when using it.

What is a DIY car heater, and can I make it?

If you’re wondering what a DIY car heater is and whether you can make it yourself, the answer is yes! DIY car heaters are homemade heating solutions that you can install in your car to keep warm during cold winter months. These heaters can be made from various materials, and there are several ways to construct them.

Some popular DIY car heater options include using tea lights and flower pots or repurposing an old toaster. However, it’s important to note that while these solutions can be effective, they may not be as safe or efficient as commercial heaters. So, if you decide to make a DIY car heater, research thoroughly and take all necessary precautions to ensure your safety.


Embarking on the journey of constructing an electric emergency heater for your car may appear intimidating, yet with the proper materials and a fraction of perseverance. This endeavor can transform into a frugally sound and dependable solution to combat the frigid climate or unanticipated situations. Remember to follow safety precautions, test the heater before use, and maintain it regularly to ensure optimal performance.

Using our tips and guidance, you can take control of your car’s heating and stay warm and comfortable on the road, no matter where your travels take you. So, get your tools ready, and start building your electric emergency heater today!

Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top