12 Point Socket Vs 6 Point Socket – Comparison

If your toolbox has 12 Point and 6 Point sockets, and you don’t know which one to use and when. Then this article will help you to understand their key differences. Remember that while 12 point sockets are more versatile, 6 point sockets can provide greater torque.

In this blog post, I’m going to talk about the key differences between 12 point sockets and 6 point sockets. Hopefully, by the end of this post, you’ll better understand which socket is suitable for the job. So let’s get started!

12 point socket vs 6 point socket

12 point socket vs 6 point socket – key differences

There are a few key differences between 12 point sockets and 6 point sockets. 12 point sockets have double the number of contact points as 6 point sockets.

12 point socket

The 12 point socket is designed for use with fasteners that have 12 points of contact. These sockets are shallower and have a smaller diameter than 6 point sockets, which makes them ideal for use in confined spaces. They’re also slightly more versatile since they can be used on fasteners with different shapes.

In addition, the 12 point design provides more surface area contact, rounds off corners, and less gripping with the fastener, which increases the risk of stripping or slipping under high pressure. So they’re not ideal choices for delicate jobs.

However, 12 point sockets are not as strong as 6 point sockets and should only be used with lightweight fasteners. In general, 12 point sockets are less costly but may not withstand high levels of torque which is suitable for more delicate tasks.

6 point socket

On the other hand, the 6 point socket is designed for use with fasteners that have 6 points of contact. These sockets are deeper and have a larger diameter than 12 point sockets, which makes them ideal for use with larger or more demanding fasteners.

In addition, the 6 point design provides more torque and gripping power, which makes it less likely to strip or slip. However, 6 point sockets can be more challenging to use in confined spaces due to their size and depth. They’re a good choice for high-torque applications or when you need to apply a lot of pressure.

Six-point sockets are typically more expensive than 12 point sockets, but they offer greater strength and durability. Usually, 6 point sockets are the better choice for heavier-duty work.

See also: 1/4 vs 3/8 Impact Wrench – Detailed Comparison

Which is better and why?

When it comes to sockets, there are two main types: 12 point sockets and 6 point sockets. Each type has its benefits and drawbacks, so picking the right socket for the job is essential. 12 point sockets are more versatile, as they can be used with a wider range of fasteners. They’re also easier to line up with the target fastener, which can save time when working in tight spaces.

However, 12 point sockets are less likely to grip the fastener as securely as a 6 point socket, which can lead to stripping. 6 point sockets, on the other hand, provide a tighter fit and greater torque, making them ideal for loosening stubborn fasteners. However, they’re not as easy to use in tight spaces, and they can be more difficult to line up with the target fastener.

Ultimately, the choice of socket depends on the specific application. For most general purposes, a 12 point socket will suffice. However, for applications where maximum torque is required, a 6 point socket is the better option.

FAQS

Can a 6 point socket withstand higher torque?

12 point socket vs 6 point socket – which socket can withstand higher torque? The amount of torque that a 12 point socket can withstand is significantly less than that of a 6 point socket. This is due to the fact that 12 point sockets have a shallower depth, which reduces the contact area between the socket and the nut or bold head.

In addition, 12 point sockets have thinner walls, which makes them more susceptible to damage from high torque loads. As a result, it is important to use the appropriate size socket for the job at hand in order to avoid damaging the tool or the fastener.

Can I use a 6 point socket on a 12 point bolt?

This question’s answer depends on several factors.

First, you need to ensure that the 6 point socket you’re using is the right size for the 12 point bolt. If it’s too small, it could damage the bolt or slip off.

Second, you must be careful about how much force you use when tightening or loosening the bolt. It could slip or break if you’re applying too much pressure on the socket.

Finally, remember that 6 point sockets are designed for use with hexagonal (6-sided) bolts. While 12 point sockets are designed for use with square (12-sided) bolts. So, while you may be able to get a 6 point socket onto a 12 point bolt, it’s not meant for that purpose, and you could end up damaging both the socket and the bolt.

What are the advantages and disadvantages of 12 Point Socket?

A 12 point socket is a type of socket that has 12 instead of 6 sides. The advantage of having more sides is that it allows for more torque to be applied to the fastener. This can be helpful when working with stubborn bolts. Another advantage of 12 point sockets is that they are less likely to slip, making them safer to use.

One downside is that they can round off bolt heads more easily than 6 point sockets. This can make it more challenging to loosen the fastener later on. Another disadvantage is that 12 point sockets are not compatible with all types of bolts. When working with a 12 point socket, it is important to double-check that it will fit the bolt head before proceeding.

Conclusion

So, what is the key takeaway from this? If you are working on a car and need to remove a bolt, it’s best to have a 12-point socket. However, if you are just starting out or don’t have many tools yet, a 6-point socket will do the job just fine. As always, feel free to reach out to us if you have any questions about which type of socket would be best for your specific needs. We hope you found this post helpful!

See also:

Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top